Charger SRT-8 V8-6.1L VIN W (2006)
10. Remove lower brake shoe hold-down clip and pin (7).
11. Remove lower shoe (6).
12. Inspect springs, adjuster, lever and aluminum shoe anchor pin for wear or damage. Replace as necessary.
INSTALLATION
NOTE: The following procedure may be used to install shoes on either side of the vehicle.
NOTE: Inspect springs, adjuster, lever and aluminum shoe anchor pin for wear or damage prior to installation. Replace as necessary.
1. Install lower brake shoe hold-down pin (7) through rear of support (2).
2. Install lower shoe (6) against support plate (2).
3. Install lower brake shoe hold-down clip (7).
4. Install shoe actuator lever (1) on end of parking brake cable (2). Make sure actuator lever is positioned with word UP facing outward.
5. Install return spring (4) to lower shoe (6).
6. Install upper shoe (6) against support plate and onto shoe actuator lever.
7. Install upper brake shoe hold-down pin (7) through rear of support and upper shoe.
