Charger SRT-8 V8-6.1L VIN W (2006)
8. Install upper brake shoe hold-down clip (7).
9. Attach return spring (4) to upper shoe (6).
10. Install shoe adjuster (8). Place end of adjuster with star wheel upward.
11. Install parking brake shoe adjuster spring (3).
12. Using Brake Shoe Gauge, Special Tool C-3919, or equivalent, measure inside diameter of parking brake drum portion of rotor. Set gauge.
13. Place Gauge (1) over parking brake shoes at widest point.
14. Using adjuster star wheel (2), adjust parking brake shoes until linings on both park brake shoes just touch jaws on gauge. This will give a good
preliminary adjustment of parking brake shoes, before a final adjustment is made at end of this procedure.
15. Install hub and bearing with wheel speed sensor as well as all components necessary to access it.
16. Lower vehicle.
17. Perform final adjustment of parking brake shoes.
