Charger SRT-8 V8-6.1L VIN W (2006)
Lifter / Lash Adjuster: Service and Repair
TAPPETS-HYDRAULIC ROLLER
REMOVAL
1. Disconnect the negative cable from the battery.
2. Remove the air cleaner.
3. Remove intake manifold.
4. Remove cylinder head cover.
5. Remove rocker arm assembly and push rods. Identify push rods to ensure installation in original location.
6. Remove the cylinder head.
7. Remove bolt from tappet guide holder.
8. Remove tappet guide holder.
9. Pull tappet out of bore with a twisting motion. If all tappets are to be removed and reused, identify tappets to ensure installation in original
location.
10. Check camshaft lobes for abnormal wear.
INSTALLATION
1. Lubricate tappets.