Charger SRT-8 V8-6.1L VIN W (2006)
Valve: Description and Operation
VALVES & SEATS - INTAKE/EXHAUST
DESCRIPTION - VALVE GUIDES
The valve guides are made of powered metal and are pressed into the cylinder head. The guides are not replaceable or serviceable, and valve guide
reaming is not recommended. If the guides are worn beyond acceptable limits, replace the cylinder heads.
DESCRIPTION - VALVES
Both the intake and exhaust valves are made of steel. The intake valve is 52.8 mm (2.08 inches) in diameter and the exhaust valve is 40.5 mm (1.59
inches) in diameter. All valves use three bead lock keepers to retain the springs and promote valve rotation.
