Charger SRT-8 V8-6.1L VIN W (2006)
Catalytic Converter: Service and Repair
CATALYTIC CONVERTER
REMOVAL
RIGHT HAND CATALYTIC CONVERTER
WARNING: The normal operating temperature of the exhaust system is very high. therefore, never work around or attempt to service any
part of the exhaust system until it is cooled. special care should be taken when working near the catalytic converter. The temperature of the
converter rises to a high level after a short period of engine operation time.
1. Disconnect negative battery cable.
2. Raise vehicle on hoist.
3. Disconnect downstream oxygen sensor (2) connectors.
4. Remove muffler and resonator.
5. 2.7L/3.5L Only - Remove nuts and cross-brace (2).
6. Remove catalytic converter to ball flange nuts (1).
7. Remove catalytic converter (3).
LEFT HAND CATALYTIC CONVERTER