Charger SRT-8 V8-6.1L VIN W (2006)
Air Duct: Service and Repair
Duct-Floor Console
DUCT-FLOOR CONSOLE
NOTE: LHD model shown. RHD model similar.
REMOVAL
1. Remove the center floor console.
2. Remove the two screws (1) that secure the floor console duct (2) to the center floor panel (3).
3. Disconnect the floor console duct from the floor distribution duct (4) and remove the floor console duct from the vehicle.
INSTALLATION
1. Position the floor console duct (2) into the vehicle.
2. Connect the floor console duct to the floor distribution duct (4).
3. Install the two screws (1) that secure the floor console duct to the center floor panel (3). Tighten the screws to 2.2 N.m (20 in. lbs.).
4. Install the center floor console.
