Charger SRT-8 V8-6.1L VIN W (2006)
Compressor Clutch: Component Tests and General Diagnostics
A/C CLUTCH BREAK-IN
After a new A/C compressor clutch has been installed, cycle the compressor clutch approximately twenty times (five seconds on, then five seconds off).
During this procedure, set the A/C-heater controls to the A/C Recirculation Mode, the blower motor in the highest speed position, and the engine speed
at 1500 to 2000 rpm. This procedure (burnishing) will seat the opposing friction surfaces and provide a higher compressor clutch torque capability.