Charger SRT-8 V8-6.1L VIN W (2006)
1. If required, install the power steering cooler brackets onto the A/C condenser.
2. Carefully position the A/C condenser (5) onto the radiator (8).
3. Install the four bolts (3) that secure the A/C condenser to the radiator. Tighten the bolts to 5 N.m (45 in. lbs.).
4. Install the receiver/drier (6) onto the A/C condenser.
5. Install the power steering fluid cooler (7) onto the A/C condenser.
6. Connect the A/C discharge line (2) and the A/C liquid line (4) onto the A/C condenser.
7. If equipped with the 3.0L diesel engine, install the charge air cooler.
8. Remove the tape or plugs from the automatic transmission cooler lines (1) and the cooler ports.
9. Connect the automatic transmission cooler lines to the cooler ports at the top of the A/C condenser.
10. Install the front fascia.
11. Reconnect the negative battery cable.
12. Evacuate the refrigerant system.
13. Charge the refrigerant system.
14. Check the automatic transmission fluid level. Fill as required.
