Charger SRT-8 V8-6.1L VIN W (2006)
the turn signal input becomes inactive or until the vehicle speed message indicates that the speed is less than 22 kilometers-per-hour (15
miles-per-hour), whichever occurs first. The hazard warning flashers will not activate this chime feature.
-
Warning Indicator Announcement - The EMIC transducer will generate one short chime each time the check gauges indicator is illuminated by the
instrument cluster circuitry. The check gauges indicator may be illuminated when any critical engine or transmission systems are operating outside
of their normal parameters. The instrument cluster monitors electronic messages received over the CAN data bus to determine when to illuminate
the check gauges indicator.
The EMIC provides chime service for all available features in the chime warning system. The EMIC relies upon its internal programming, numerous
hard wired inputs, and electronic message inputs received from other modules over the CAN data bus network to provide the chime warning system
features. The internal programming of the EMIC determines the priority of each chime request input that is received, as well as the rate and duration of
each chime that is to be generated.
The hard wired chime warning system inputs to the EMIC may be diagnosed and tested using conventional diagnostic tools and procedures. However,
conventional diagnostic methods may not prove conclusive in the diagnosis of the EMIC, the CAN data bus, or the electronic messages received by the
EMIC from other modules. The most reliable, efficient and accurate means to diagnose the EMIC, the CAN data bus, or the electronic message inputs
used for the chime warning system requires the use of a diagnostic scan tool.
