Charger SRT-8 V8-6.1L VIN W (2006)
Secondary 5-volt supply:
-
supplies the required 5 volt power source to the oil pressure sensor.
-
supplies the required 5 volt power source for the Vehicle Speed Sensor (VSS) (if equipped).
-
supplies the 5 volt power source to the transmission pressure sensor (if equipped with an RE automatic transmission).
IGNITION CIRCUIT SENSE
The ignition circuit sense input tells the PCM the ignition switch has energized the ignition circuit.
Battery voltage is also supplied to the PCM through the ignition switch when the ignition is in the RUN or START position. This is referred to as the
"ignition sense" circuit and is used to "wake up" the PCM.
SENSOR RETURN
The Sensor Return circuits are internal to the Powertrain Control Module (PCM).
Sensor Return provides a low-noise ground reference for all engine control system sensors. Refer to Power Grounds.