dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Battery Cable|Description and Operation|Page 4547 > < Battery Cable|Description and Operation|Page 4545
Page 3
background image

4. Connect the voltmeter to measure between the battery negative cable terminal clamp and the battery negative cable eyelet terminal connection at

the vehicle body. Rotate and hold the ignition switch in the Start position. Observe the voltmeter. If the reading is above 0.2 volt, clean and tighten
the battery negative cable eyelet terminal connection at the vehicle body. Repeat the test. If the reading is still above 0.2 volt, replace the battery
rear negative cable.

Battery Cable|Description and Operation|Page 4547 > < Battery Cable|Description and Operation|Page 4545