Charger SRT-8 V8-6.1L VIN W (2006)
5. One at a time, secure the battery positive cable to the routing clips located in the rear seat area.
6. One at a time, secure the battery positive cable to the routing clips located in the rear compartment area.
7. Position the carpet back to the normal position.
8. Install the right, B - pillar lower trim panel.
9. Install the right, front and rear door sill trim panels.
10. Install the right, rear seat cushion. Engage retainer loops into cup on floor kick up. Push downward at forward edge at each retainer loop of the
rear seat cushion to engage retainers.
11. Install the right, front seat.
12. Install the battery positive cable to rear Power Distribution Center (PDC) fastener (3).