Charger SRT-8 V8-6.1L VIN W (2006)
5. Lubricate NEW O-ring on end of pressure hose with clean power steering fluid.
6. Install pressure hose (2) to steering gear (1). Tighten tube nut to 47 Nm (35 ft. lbs.) torque.
CAUTION: Prior to coupling installation, make sure gear is centered in its travel to match clockspring centering in steering column.
7. Align coupling (2) with input shaft (3) and install steering coupling. Install NEW pinch bolt. Tighten bolt to 54 Nm (40 ft. lbs.) torque.
8. Install each outer tie rod end (5) to its knuckle (2). Install nuts (1) and tighten to 85 Nm (63 ft. lbs.) torque.
9. Install tire and wheel assemblies (1). Tighten wheel mounting nuts (3) to 150 Nm (110 ft. lbs.) torque.
10. Lower vehicle.
