Charger SRT-8 V8-6.1L VIN W (2006)
10. Once alignment is found to be within specifications, using a crowfoot wrench, tighten tension strut cradle bolt nut (2) to 176 Nm (130 ft. lbs.)
torque while holding the bolt stationary
11. Install belly pan.
Arm - Lower Control - RWD
ARM - LOWER CONTROL - RWD
REMOVAL
1. Raise and support vehicle.
2. Remove wheel mounting nuts (3), then tire and wheel assembly (1).
3. Remove belly pan.
4. Remove screws (1) fastening stabilizer bar heat shield (3) on side of control arm repair.
