Charger SRT-8 V8-6.1L VIN W (2006)
CAUTION: Because of stabilizer bushing outer shape, it is very important to install bushings in position discussed in following step.
13. Utilizing slit in bushing, install stabilizer bar bushing (1) against locating collar on stabilizer bar (2) as shown. Make sure slit in bushing is
positioned toward rear of vehicle.
14. Install stabilizer bar bushing retainer halves (1)(2) around bushing (3).
15. Install bolts (2) securing stabilizer bar bushing retainer halves (2) to cradle. Tighten bolts (2) to 60 Nm (44 ft. lbs.) torque.
