Charger SRT-8 V8-6.1L VIN W (2006)
9. Install nuts (2) on upper control arm body mounting bolts (1). Tighten nuts to 75 Nm (55 ft. lbs.) torque.
10. Install three nuts (2) fastening shock assembly (4) to shock tower (3). Tighten nuts to 27 Nm (20 ft. lbs.) torque.
11. If equipped, align shock tower cap (1) with shock mounting nuts (2) and snap into place.
12. If installing left upper control arm, install coolant recovery container.
13. If installing right upper control arm, install IPM.