Charger SRT-8 V8-6.1L VIN W (2006)
2. Remove wheel mounting nuts (3), then rear tire and wheel assembly (1).
3. Remove bolt and nut (2) mounting link (3) at knuckle.
4. Remove bolt and nut (1) mounting link (3) at cross member.
5. Remove link (3).
INSTALLATION
NOTE: Although the compression link is different end-to-end, there is no top and bottom.
1. Position link and install bolt and nut (1) mounting link (3) at crossmember. Do not tighten bolt at this time.