Charger SRT-8 V8-6.1L VIN W (2006)
6. Access and remove front brake rotor.
7. Remove nut (1) from outer tie rod end stud.
8. Using Puller (2), Special Tool 9360, separate tie rod stud (1) from knuckle.
9. Loosen nut (4) attaching upper ball joint stud (1) to knuckle. Back nut off until nut is even with end of stud. Keeping nut on at this location will
help keep end of stud from distorting while using Puller in next step.