Charger SRT-8 V8-6.1L VIN W (2006)
^
Fore-or-aft bow faces forward (curves around coil spring).
^
Up-or-down bow faces downward.
1. Place link in bracket on crossmember (1). Install bolt and nut (2) at crossmember (1) as shown. Do not tighten bolt at this time.
2. Install bolt and nut (2) mounting link to knuckle (3) as shown. Do not tighten bolt at this time.
3. Install shock absorber (3) by setting lower end into pocket in spring link (4), then tipping top inward until aligned with upper mounting holes.
4. Install lower shock mounting bolt and nut. Do not tighten at this time.
