Charger SRT-8 V8-6.1L VIN W (2006)
42. Install tire and wheel assemblies (1). Tighten wheel mounting nuts (3) to 150 Nm (110 ft. lbs.) torque.
43. Lower vehicle until rear wheels are just above floor level.
44. Apply parking brake lever. Release lever, then reapply.
45. Check to make sure rear wheels will not rotate with lever applied.
46. Lower vehicle.
47. Connect battery negative cable (2) to battery post. It is important that this is performed properly.
48. Pump brake pedal several times to ensure vehicle has a firm brake pedal before moving vehicle.
49. Position vehicle on alignment rack/drive-on hoist. Raise vehicle as necessary to access mounting bolts.
50. Tighten shock absorber lower mounting bolt nuts (4) to 72 Nm (53 ft. lbs.) torque.
