Colt L4-089 1468cc 1.5L VIN K 2-bbl (1988)
FIGURE 1
3.
When assembling the pads and shims, apply a film of the supplied grease to the contact surfaces on both sides of the anti-squeak shim (Figure 1).
NOTE :
MOPAR MULTI-PURPOSE GREASE, PN 4318063, CAN BE USED TO LUBRICATE THE ANTI-SQUEAK SHIM IF THE
SUPPLIED GREASE PACK IS MISSING OR LOST, OR THE BRAKE IS DISASSEMBLED FOR OTHER SERVICE.
CAUTION: USE EXTREME CARE NOT TO APPLY GREASE TO THE ROTOR CONTACT SURFACES OF THE BRAKE PAD.
FIGURE 2
4.
The pads and shims, when installed in the vehicle, should be in the order shown in Figure 2.
5.
Finish reassembly per the appropriate service manual instructions.
POLICY:
Reimbursable within the provisions of the warranty
TIME ALLOWANCE:
Labor Operation No.
05-70-22-96 . . . . . . . . . .
0.5 Hrs.
FAILURE CODE:
68 - Noisy