Colt L4-089 1468cc 1.5L VIN K 2-bbl (1988)
Accelerator Cable: Service and Repair
REMOVAL OF ACCELERATOR CABLE
Accelerator Cable, Throttle End
1. Loosen the accelerator cable adjusting nut.
Accelerator Cable, Pedal End
2. Disconnect the accelerator cable from the accelerator arm.
3.
Remove the accelerator cable.
REMOVAL OF ACCELERATOR PEDAL
Accelerator Return Spring And Cotter Pin
1. Loosen the accelerator cable adjusting nut, and disconnect the accelerator cable from the accelerator arm, remove the accelerator pedal.
2. Remove the return spring from the accelerator arm.
3. Remove the cotter pin from the accelerator arm shaft, then remove the accelerator arm from the accelerator arm bracket.
INSPECTION
1. Check the inner and outer cables for damage.
2. Check the cable for smooth movement.
3. Check the accelerator arm is not bent.
4. Check the return spring for deterioration.
5. Check for connection of accelerator cable to end fitting.
INSTALLATION