Colt L4-089 1468cc 1.5L VIN K 2-bbl (1988)
Inhibitor Switch: Testing and Inspection
W/ Multi-Point Fuel Injection
Inhibitor Switch
Models w/Automatic Transaxle
1.
Disconnect inhibitor switch connector.
2.
Operate selector lever and check continuity between terminals 8 and 9 of inhibitor switch side connector.
3.
Continuity should exist with selector lever in P and N position, but should not exist with selector lever in R, D, 2 or L position.
4.
If test results are not as specified, adjust inhibitor switch.
