Colt L4-089 1468cc 1.5L VIN K 2-bbl (1988)
Control Arm: Service and Repair
Fig. 3 Lower control arm assembly. 1988 Colt
1. Raise and support vehicle.
2. On 1988 models, remove center member. On all models, remove chassis under cover, then disconnect stabilizer bar from lower control arm.
3. Disconnect ball joint from steering knuckle.
4. Loosen lower control arm to chassis attaching bolts, then remove lower control arm.
5. Replace ball joint dust cover.
6. Reverse procedure to install.
