Colt L4-089 1468cc 1.5L VIN K 2-bbl (1988)
Synchronizer Ring: Technical Service Bulletins
M/T Synchronizer Ring - Modification
Models
1988 LA & NF45Z Equipped With KM200 Series Transaxle
Subject
Synchronizer ring Change
Index
TRANSMISSION
Date
February 13, 1989
No.
21-07-89
(C21-16)
P-470
BODY CODE LEGEND
LA
- COLT
NF45Z - VISTA
Effective in October, 1987, with transaxle No. EX4200 and later, the diameter of the synchronizer ring cone used in the KM200 series transaxle was
decreased by 1 mm (.03937 in.). This change was made to improve durability. Due to this change, the cone diameter of each speed gear was also
decreased by 1 mm (.03937 in.) The new synchronizer ring cone is not interchangeable in earlier built transaxles unless it is changed together with its
new speed gear. An Old and New Part Number Identification Chart along with a Synchronizer Ring Identification Chart and a Speed Gear Identification
Chart are included in this Technical Service Bulletin for your convenience.
POLICY:
Information only
