Colt L4-1410cc 1.4L SOHC (1984)
Fig. 9 Pin type caliper exploded view. Rear disc brake
BRAKE PADS REPLACE
1.
Raise and support vehicle, then remove wheel assembly.
2.
Disconnect parking brake cable.
3.
Remove lower caliper lock pin, then lift caliper upward and support it with wire.
4.
Remove brake pads and shims.
5.
Reverse procedure to install.
CALIPER REPLACE
1.
Raise and support vehicle, then remove wheel assembly.
2.
Disconnect brake hose, then parking brake cable from brake assembly.
3.
Remove brake assembly attaching bolts, then brake assembly.
4.
Remove brake pads and shims, then separate caliper body from caliper support.
5.
Reverse procedure to install.
CALIPER OVERHAUL
1.
Remove caliper assembly as outlined.
2.
Using a suitable screwdriver, remove cap ring and garter spring from lever cap.
3.
Remove lever cap from caliper groove, then retaining ring and pull out parking lever assembly.
4.
Unscrew spindle from caliper body, then remove boot ring.
5.
Push out piston from caliper body using a suitable screwdriver.
6.
Using a suitable screwdriver, remove piston seal. Take care not to damage caliper bore.
