dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Clutch Pedal Assembly > < Clutch - Growl When Pedal is Depressed
Page 1
background image

Clutch Linkage: All Technical Service Bulletins
Clutch - Growl When Pedal is Depressed

Models

All 1988 And Earlier Front Wheel Drive With Manual Transaxle And 1989 AL Body

Subject

Noise During Clutch Actuation At Moderate To High Engine Speeds

Index

CLUTCH

Date

March 20, 1989

No.

06-02-89 REVISION A

P-1092

(C06-03)

BODY CODE LEGEND

1988 & Earlier - All Front Wheel Drive Vehicles 1989 AL - OMNI/HORIZON

This bulletin supersedes Technical Service Bulletin # 06-02-89 which should be removed from your file, (dated 02/13/89).

SYMPTOM/CONDITION

A noise or "growl" in clutch release system when clutch pedal is depressed at moderate to high engine speeds.

DIAGNOSIS

^

Apply parking brake.

^

Place transaxle in neutral.

^

Start engine.

^

Accelerate engine and maintain engine speed at approximately 3500 RPM. Depress clutch pedal. Noise or "growl" will be heard when pedal is
about halfway through the stroke.

PARTS REQUIRED

1

Lever - Clutch Release

P/N 4511039

REPAIR PROCEDURE

1.

Using appropriate service manual, remove outer retaining ring and clutch cable retainer. Disconnect cable and retainer grommet.

2.

Remove existing clutch release lever and install new clutch release lever P/N 4511039. Reconnect cable and install grommet, retainer and
retaining ring.

3.

Depress the clutch pedal 3 to 4 times to allow the adjuster mechanism to attain proper adjustment.

POLICY:

Reimbursable with the provisions of the warranty.

TIME ALLOWANCE:
Labor Operation No.

Refer To Appropriate Labor Operation Time Schedule For
Existing Time.

FAILURE CODE:

68 - Noisy

Clutch Pedal Assembly > < Clutch - Growl When Pedal is Depressed