dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

A/T - No Forward or Reverse Drive/Slippage|Page 1661 > < A L L Diagnostic Trouble Codes - Trans and Drivetrain|System Diagnosis
Page 1
background image

Clutch: Customer Interest
A/T - No Forward or Reverse Drive/Slippage

Models

1984 Colt & Colt Vista Equipped With Automatic Transaxle

Subject

Low Mileage (Less Than 600 Miles) Rear Clutch Burn out

Index

TRANSMISSION

Date July 2, 1984

No.

21-09-84

P-2802-C
SYMPTOM/CONDITION

No drive in forward or reverse, or slips during heavy acceleration on vehicles built prior to December, 1983.

DIAGNOSIS

The problem may be caused by manual control valve overstroke. This condition will create slight pressure generation to the rear clutch in neutral. The
clutch is then partially applied during neutral operation. The overstroke of the manual control valve is due to mis-machining of the valve.

PARTS REQUIRED

1 - Valve (Manual Control)

PN MD707703

REPAIR PROCEDURE

1.

Remove transaxle and replace rear clutches as required per the appropriate service manual.

2.

Remove manual control valve from valve body.

A/T - No Forward or Reverse Drive/Slippage|Page 1661 > < A L L Diagnostic Trouble Codes - Trans and Drivetrain|System Diagnosis