Colt L4-1597cc 1.6L SOHC Turbo VIN F FI (1988)
Fuel Pressure Testing Equipment Installed
3. Using a fuel pressure gauge adapter, install the fuel-pressure gauge to the injection mixer, and reconnect the high pressure hose to the gauge.
4. Connect the battery negative terminal.
5. Apply battery power to the fuel pump drive terminal to activate the fuel pump. With fuel pressure applied check that no fuel is leaking at any of the
connections.
Injection Mixer And Components
6. Measure the fuel pressure with the vacuum hose connected to the fuel pressure regulator.
Standard Value:
35-38 psi (240-260 kPa).
NOTE: At the completion of step 6, prior to turning the ignition off, disconnect the battery power to the fuel pump drive terminal. If the engine
