Colt L4-1597cc 1.6L SOHC Turbo VIN F FI (1988)
Lower Valve Body
19. Insert two Special Tools, MD998266, into guide pin holes in intermediate plate. Using guide pins as a guide, install lower separating plate and
lower valve body on intermediate plate.
Valve Body
20. Install lower valve body tightening bolts:
A: 19 mm (.748 in.)
B: 34 mm (1.339 in.)
C: 40 mm (1.575 in.)
D: 53 mm (2.087 in.)
21. Tighten all bolts to 10-12 Nm (7.5-8.5 ft.lbs.).
22. Install oil filter and tighten flange bolts to 5-6.5 Nm (4-5 ft.lbs.).
23. Reconnect throttle control cable to throttle cam.
24. Insert the solenoid connector into the case.
25. Install new oil pan gasket and oil pan, then tighten washer-assembled bolts and torque between 10 and 11 Nm (7.5 and 8.5 ft.lbs.).
26. Refill transaxle to proper level with ATF.
