Colt L4-1597cc 1.6L SOHC Turbo VIN F FI (1988)
b.
Depress clutch pedal several times and recheck pedal freeplay.
c.
Repeat adjustment as needed until freeplay is within specifications.
3. After adjusting pedal height and freeplay, measure height of clutch pedal from floorboard at clutch release point (D)
4. If release point is less than value specified in chart, check clutch assembly and release mechanism and repair as needed.
MODELS W/HYDRAULIC RELEASE SYSTEM
1. Measure clutch pedal height (A)
2. Check clutch pedal clevis pin play. It should be 0.04-0.12 inch, measured at pedal.
3. If clutch pedal height is not within specifications, turn either the clutch switch or adjusting bolt to bring height within specifications. If clevis pin
play is not within specifications, adjust clutch master cylinder pushrod as necessary to bring play within specifications. Do not press pushrod into
master cylinder when adjusting clevis pin clearance.
4. Check clutch pedal freeplay and clutch release point. If either dimension is not within specifications, hydraulic system requires bleeding or clutch
is faulty.
