Colt L4-1795cc 1.8L SOHC (1994)
Throttle Position Sensor Inspection
1. Disconnect the throttle position sensor connector.
Throttle Position Sensor Inspection
2. Measure the resistance between the throttle position sensor side connector terminal (1) and terminal (4).
Standard value: 3.5 - 6.5 K ohms
Throttle Position Sensor Inspection
3. Measure the resistance between the throttle position sensor side connector terminal (2) and terminal (4).
^
Throttle valve slowly opens until fully open from the idle position
^
Changes smoothly in proportion to the opening angle of the throttle valve
4. If the resistance is outside the standard value, or if it doesn't change smoothly, replace the throttle position sensor.