Colt L4-1795cc 1.8L SOHC (1994)
Air Bag Control Module: Technical Service Bulletins
SRS Control Unit - Connector Simplification
NO: 08-13-95
GROUP: Body
DATE: Apr. 14, 1995
SUBJECT:
SRS - Electronic Control Unit, Connector Lock Change
MODELS:
1994 - 1995 (B7) Stealth
1994 - 1995 (B8) Colt Vista/Summit Wagon
1994 - 1995 (B9) Colt/Summit
DISCUSSION:
SRS Module Connector Lock
To simplify unlocking the SRS - Electronic Control Unit Connector, a change was made to the lock lever. A groove was added to make the lock spring
visible, along with an arrow that shows the direction of lock spring operation (Figure 1). The old design (Figure 2) works the same way. The change was
made to make the procedure simpler. Improper unlatching methods will damage the lock mechanism. Damage to this lock mechanism will require ECU
replacement.
Following are the proper steps to unlatch the mechanism:
SRS Module Connector Unlatching
1.
Using a flat blade screwdriver, push the lock spring in toward the control unit. Once the spring is pushed in far enough, the lock lever will unlatch
and move in an upward direction (Figure 3).
NOTE:
FIGURE 2 SHOWS THE OLD STYLE LOCK LEVER. THE LOCK SPRING MUST BE PUSHED IN TO UNLATCH THE LEVER.
SCREWDRIVER ORIENTATION MAKES THIS PROCEDURE LESS OBVIOUS.
POLICY: Information Only
