Colt L4-1795cc 1.8L SOHC (1994)
Clockspring Assembly / Spiral Cable: Service and Repair
Air Bag Module and Clock Spring
REMOVAL SERVICE POINTS
NEGATIVE (-) BATTERY CABLE DISCONNECTION
Disconnect the negative battery cable from the battery and tape the terminal.
Caution: Wait at least 60 seconds after disconnecting the battery cable before doing any further work. See: Service Precautions
AIR BAG MODULE REMOVAL
1. Remove the air bag module mounting nut using a socket wrench from the back side.
2. When disconnecting the connector of the clock spring from the air bag module, press the air bag's lock toward the outer side to spread it open. Use
a screwdriver, as shown in the figure to the right, to pry so as to remove the connector gently.
Cautions
1. When disconnecting the air bag module-clock spring connector, take care not to apply excessive force to it.
2. The removed air bag module should be stored in a clean, dry place with the pad cover face up.
