dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 6024 > < Initial Inspection and Diagnostic Overview
Page 1
background image

Starter Armature: Component Tests and General Diagnostics

Armature Short-Circuit Test

ARMATURE SHORT-CIRCUIT TEST

1.

Place armature in a growler.

2.

Hold a thin steel blade parallel and just above while rotating armature slowly in growler. A shorted armature will cause blade to vibrate and be
attracted to the core. Replace shorted armature.

Armature Coil Ground Test

ARMATURE COIL GROUND TEST

Check the insulation between each commutator segment and armature coil core.
If there is no continuity, the insulation is in order.

Armature Coil Open-Circuit Inspection

ARMATURE COIL OPEN-CIRCUIT INSPECTION

Check the continuity between segments. If there is continuity, the coil is in order.

Stop Ring/Snap Ring Installation

Initial Inspection and Diagnostic Overview|Page 6024 > < Initial Inspection and Diagnostic Overview