Colt L4-1795cc 1.8L SOHC (1994)
Transmission Speed Sensor: Testing and Inspection
PULSE GENERATOR A INSPECTION
1. Disconnect the pulse generator A connector.
2. Measure the resistance between the pulse generator A side connector terminals 1 and 2.
Standard value: 215-275 Ohms [at 20°C (68°F)]
3. If the resistance is outside the standard value, replace the pulse generator assembly.
PULSE GENERATOR B INSPECTION
1. Disconnect the pulse generator B connector.
2. Measure the resistance between the pulse generator B side connector terminals 3 and 4
Standard value: 215-275 Ohms [at 20°C (68°F)]
3. If the resistance is outside the standard value, replace the pulse generator assembly.
