Colt Vista 2WD L4-1795cc 1.8L SOHC (1993)
Wheel Hub: Service and Repair
Rear
Fig. 9 Removal of axle hub. Colt Vista & Summit Wagon w/FWD
1. Remove axle hub in sequence as shown, noting the following:
a. On models with ABS, ensure that the end pole piece does not contact teeth of rotor or other parts.
2. Reverse procedure to install noting the following:
a. When installing flange nut, crimp nut to meet concave portion of the spindle.
b. On models with ABS, adjust speed sensor by placing a feeler gauge speed sensors pole piece and rotors toothed surface. Gap should be
between 0.008-0.028 inches, then tighten speed sensor.