Colt Vista 2WD L4-1997cc 2.0L SOHC (1985)
REPAIR PROCEDURE
It will be necessary to replace the shift rail and seat to correct the no-shift condition.
1.
Remove the transaxle from the vehicle.
FIGURE 1
2.
Remove the select shift rail (#3, Figure 1).
3.
Install the new seat and shift rail.
4.
Reassemble and reinstall the transaxle.
5.
Road test the vehicle and check for proper shifting.
POLICY:
Reimbursable within the provisions of the warranty
TIME ALLOWANCE:
Existing Labor Operations
Labor Operation No.
21-00-03-16
2.1 Hrs.
21-32-02-56
0.9 Hrs.
FAILURE CODE:
K8 - Shift Linkage Defect