dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Recall - Driveability (Cold Drive Sag)|Page 772 > < Recall - Driveability (Cold Drive Sag)|Page 770
Page 4
background image

FIGURE 3

Service Procedure Carburetor Modification and Adjustment (continued)

6.

Install supplied orifice (0.5 mm) into end of hose attached to secondary vacuum control diaphragm. Reattach hose. (See Figure 3.)

7.

Clean gasket surfaces on the manifold and carburetor.

8.

Reinstall carburetor using gasket supplied.

9.

Reinstall carburetor air cleaner assembly.

Recall - Driveability (Cold Drive Sag)|Page 772 > < Recall - Driveability (Cold Drive Sag)|Page 770