Colt Vista 4WD L4-1997cc 2.0L SOHC (1984)
torque bolts to specifications in crossing pattern.
6. Install sleeve over camshaft and press oil seal into place using suitable driver.
7. Install camshaft sprocket and timing belt, then ensure timing marks are properly aligned.
8. Adjust valves to specifications as outlined, then temporarily install rocker cover.
9. Reverse remaining procedure to complete installation, then check timing belt tension as outlined. After engine reaches normal operating
temperature, recheck valve clearances and adjust as needed.
Fig. 24 Applying sealant to semi-circular packing
10. When installing rocker cover after checking valve clearances, apply suitable sealer to semi-circular packing and cylinder head, Fig. 24, then install
rocker cover.
