Colt Vista AWD L4-1795cc 1.8L SOHC (1993)
Differential Carrier: Service and Repair
Limited Slip
Predisassembly Inspection
Fig. 59 Mounting Differential Case Assembly In Vise
1. Secure differential case assembly in a vise so that differential side gear (right) is facing upward as shown.
Fig. 60 Inserting Feeler Gauge Into Differential Case
2. Insert a 0.0012 inch (.03 mm) feeler gauge at two places (diagonally) between differential case B and thrust washer.
CAUTION: Do not insert feeler gauge in oil groove of differential case B.
Fig. 61 Checking Differential Gear Backlash (W/Limited Slip Differential)
3. Insert side gear holding tool No. MB990990 or equivalent at spline part of differential case B (right) and ensure that side gear rotates.
4. Insert a 0.0035 inch (.09 mm) feeler gauge to replace 0.0012 inch (.03 mm) feeler gauge.
5. Insert side gear holding tool No. MB990990 or equivalent at spline part of differential case B (right) and ensure that side gear does not rotate.
6. Differential gear backlash (clearance in thrust direction of side gear) should be within 0.0012-0.0035 inch (.03 mm-0.09 mm). If clearance in the
thrust direction of the side gear is within specification, backlash of differential gear is normal.