Colt Wagon 2WD L4-1468cc 1.5L SOHC (1989)
12. Removal Of Seat Adjuster
To remove the rear seat adjuster mounting bolts located at the rear on the inboard side, remove the floor console mounting bolts shown in the
illustration and raise floor console slightly.
SERVICE POINTS OF INSTALLATION
12. Installation Of Seat Adjuster
1. Apply the specified grease to the sliding parts.
Specified grease: MOPAR Multi-mileage Lubricant Part Number 2525035 or equivalent
2. With the seat adjuster at the rearmost position and with both slide locks positively fastened, install the front seat from the front. Temporarily
tighten the mounting bolts, and make sure that adjuster locks correctly on both sides during forward and backward movement. Tighten the
mounting bolts to the specifications in the sequence shown in the illustration.
