Colt Wagon 2WD L4-1468cc 1.5L SOHC (1989)
b. Output pressure side to side difference should not exceed 121 psi.
13.
On 4WD models, gauge pressure reading should be as follows:
a. When input pressure is 1991 psi, output pressure should read 1249-1491 psi.
b. Output pressure side to side difference should not exceed 121 psi.
14.
On all models, if pressure readings are as specified, proceed to steps 16 or 17 as applicable.
15.
If pressure readings are not as specified, replace the proportioning valve and bleed the hydraulic brake system, refer to MAINTENANCE
PROCEDURES/HYDRAULIC SYSTEM BLEEDING & FLUSHING.
16.
On 2WD models, adjust load sensing spring distance L to 3.51-3.59 inch.
17.
On 4WD models, adjust load sensing spring distance L to 3.47-3.55 inch.
