Colt Wagon 2WD L4-1468cc 1.5L SOHC (1989)
2. Pull out door window regulator through the across hole.
SERVICE POINTS OF INSTALLATION
10. Application Of Grease To Door Window Regulator
1. Apply the specified grease to the regulator rotating and sliding parts.
Specified grease: MOPAR Multipurpose Grease Part Number 2932524 or equivalent
2. if the door glass has been removed from the glass holder, reinstall in the position shown in the illustration.
Standard value: 249 - 251 mm (9.8 - 9.9 in.)
3. Raise the door glass fully, and then adjust the following items 50 that the door glass fits evenly into the door glass channel all the way around:
a. Loosen the roller guide mounting screws, and then the slant of the glass in the front-to-back direction.
b. Lower the door glass until the holder reaches the access hole, loosen the door glass holder mounting screws, and then adjust the
front-to-hack position of the glass.
