Conquest L4-2555cc 2.6L SOHC Turbo (1985)
Automatic Shut Down (ASD) Relay: Testing and Inspection
Fig. 22 Control relay connector.
1984-86 Models
Control relay is mounted above the ECU under instrument panel air duct.
1.
Check continuity between terminals 1 and 7, then 3 and 7, Fig. 22. If continuity exists, control relay is defective. Replace control relay.
2.
Apply battery voltage across terminals 8 and 4, Fig. 22, while testing continuity between terminals 3 and 7. If no continuity exists, control relay is
defective.