Conquest TSI L4-2555cc 2.6L SOHC Turbo (1986)
Balance Shaft Chain: Service and Repair
Silent Shaft Chain and Timing Chain Installation
Fig. 46 Timing chain installation. 2600cc engines
1.
Rotate crankshaft to place No. 1 piston at top dead center, compression stroke.
2.
Install camshaft sprocket and crankshaft sprocket on timing chain. When the sprockets are installed, ensure the mating marks of the chain and
sprockets are properly aligned. The mating marks on the sprockets are punched marks on the corresponding teeth. The marks on the chain are two
plated links, Fig. 46.
3.
Install camshaft sprocket on camshaft and align the keyway of the crankshaft sprocket with the key of the crankshaft, then install sprocket on
crankshaft. Ensure timing marks are properly aligned.
Fig. 45 Counterbalance shaft drive system. 2600cc engine
4.
Install crankshaft sprocket ``B,'' Fig. 45, on the crankshaft.
