Conquest TSI L4-2555cc 2.6L SOHC Turbo (1986)
1985 VEHICLES ONLY
On vehicles built before February 11, 1985, it will be necessary to remove the modulator and adapter harness and connect the main wiring to the new
ECU, as shown below. Remove old ECU and install new ECU, PN MD117208, according to the service manual procedure.
On 1985 vehicles built on or after February 11, 1985, it will be necessary to remove the modulator and install a connector assembly, PN MD117387
(supplied in package), into the end of the main harness that the modulator was connected to as shown below. Remove the old ECU and install the new
ECU, PN MD117208, according to the service manual procedure.
1986 VEHICLES
Remove old ECU and install the new ECU, PN MD117208, according to the service manual procedure.
Attach Authorized Modification Label, PN 4275086, as illustrated below.
POLICY:
Reimbursable within the provisions of the warranty
TIME ALLOWANCE:
Labor Operation No.
08-15-62-91
1985 . . . . . . . . .
0.8 Hrs.
1986 . . . . . . . . .
0.6 Hrs.
FAILURE CODE:
AM - Authorized Modification