dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

A/T - Valve Body/Check Valve Specification Revision|Page 1652 > < Transmission Speed Sensor, A/T|Locations
Page 1
background image

Valve Body: Technical Service Bulletins
A/T - Valve Body/Check Valve Specification Revision

Models

1985-1988 "YDC" (Conquest) Equipped With JM600 Automatic Transmission

Subject

Automatic Transmission Valve Body and Check Valve Specification Changes - Service Manual Revisions

Index

TRANSMISSION

Date

April 11, 1988

No.

21-05-88

P-1318

(C21-06)
The JM600 transmission for 1988 model year Conquest vehicles, contains one valve body orifice check valve, instead of three as was used for the 1985,
1986, and 1987 Conquest JM600 transmissions. This change from three check valves to one was effective with transmission No. MR604.

Group 21 (Transmission) of the 1988 Conquest Service Manual should be revised on the pages indicated below to reflect this change.

In addition to the above, orifice check valve identification information (color coding) was inadvertently omitted from the 1985, 1986, and 1987 Conquest
Service Manuals. The check valves are color coded to ensure that the different diameter valves are installed in their proper places.

Please refer to the service manuals listed below and insert the corrected information as indicated.

Publication

Applicable

Manual

Number

Pages

1988 Conquest Volume I

81-270-8015

21-120, 21-125

1987 Conquest Volume I

81-270-7013

21-125

1986 Conquest Volume I

81-270-6013

21-119

1985 Conquest Volume I

81-270-5013

21-119

1988 Conquest - Group 21 - Transmission

Page 21-120

A.

Step 3 should read as follows:

A/T - Valve Body/Check Valve Specification Revision|Page 1652 > < Transmission Speed Sensor, A/T|Locations