D150 1/2 Ton Pickup 2WD L6-225 3.7L VIN W 2-bbl (1982)
Band: Adjustments
Front Band Adjustment
The kickdown band adjusting screw is located on the left side of the transmission case.
1. Loosen lock nut and back off approximately five turns. Test adjusting for free turning in the transmission case.
2. Using wrench, Tool C-3380-A with adapter C-3705, tighten adjusting screw 47 to 50 in. lbs. ( 5 N.m ), if adapter C-3705 is not used, tighten
adjusting screws to 72 in, lbs. (8 N.m) which is the true torque.
3. Back off adjusting screw the number of turns listed in "Specification". Hold adjusting screw in this position and tighten lock nut to 35 ft. lbs. (47
N.m).
