D150 1/2 Ton Pickup Axle Shaft Service and Repair
Axle Shaft: Service and Repair
Conventional Fixed/Floating Axle Shaft
Axle Shaft Removal and Installation
SPICER TYPE
1. Remove axle shaft flange nuts and lock washers.
2. Remove tapered dowels and axle shaft assembly by tapping axle shaft sharply in center of flange with a suitable hammer.
3. Reverse procedure to install.
Axle Shafts & Bearings Replace
Fig. 4 Removing differential pinion shaft lock pin
Fig. 5 Removing C-lock washers
Fig. 6 Removing axle shaft bearing and seal. Exc. 9-1/4 inch HD axle
